Please note: Shelving is not included as standard. However, we can provide shelving upon request — please contact us to discuss your requirements, and it will be charged separately.
All our buildings will arrive untreated (except for the floor and roof) unless a full treatment option has been selected. If they are dip (water based) treated, once installed they will need treating as soon as possible with a solvent based preservative such as Cuprinol shed protector or Ronseal shed preserver. It is recommended that this is then done on an annual basis in order to protect the building from water ingress.
Don’t see the size you need? Call us on 0121 420 1521 to speak to our team directly for a bespoke quote!
Don’t see the size you need? Call us on 0121 420 1521 to speak to our team directly for a bespoke quote!
If you need a compact, practical storage solution for your garden, a bespoke tool shed from Rutland Sheds could be exactly what you’re looking for. Designed for storing BBQs, lawnmowers, garden tools, bikes, and smaller equipment, our tool sheds are handcrafted in our Bearwood workshop using quality tongue & groove shiplap timber.
Our standard tool shed range starts from 3ft x 2ft and goes up to 6ft x 4ft — but we can make any size or specification you need. Every shed features a single sloping roof, making it ideal for positioning against a wall or fence to make the most of your available garden space.
We offer free delivery and installation within 20 miles of our Bearwood workshop. Our team will deliver, assemble, and position your tool shed — you don’t need to lift a finger. Check your postcode to confirm delivery availability.
Can’t find the size you need? We manufacture all our buildings in-house, so we can accommodate virtually any dimension or requirement. Call us on 0121 420 1521 for a bespoke quote — we’re here Monday to Saturday, 9am to 5pm.
It depends on what you plan to store. For basic garden tools, a 3x2ft or 4x2ft shed is sufficient. If you need to store a lawnmower alongside tools and a BBQ, we’d recommend a 6x4ft or larger. Our team can advise on the best size for your needs.
Most garden sheds fall under permitted development rights in the UK, meaning no planning permission is required — provided the shed is under 2.5m in height, not in front of the principal elevation, and covers less than 50% of the garden area. Our tool sheds are compact enough to typically fall within these rules, but we recommend checking with your local council if you’re unsure.
We use tongue & groove shiplap timber throughout — floors, walls, and roof. All timber is sourced from PEFC and FSC certified suppliers, ensuring responsible forestry. We recommend treating your shed with a quality preservative within 4 weeks of installation to extend its lifespan.
Shelving is not included as standard but can be added on request. Please contact us to discuss your requirements and we can provide a separate quote.
We’re based in Bearwood, Smethwick (B66 4AB) and offer free delivery and installation within 20 miles — covering Birmingham, Wolverhampton, Coventry, Solihull, and surrounding areas. We also deliver nationwide; please contact us for a delivery quote outside the free zone.
All our buildings will arrive untreated (except for the floor and roof) unless a full treatment option has been selected. If they are dip (water based) treated, once installed they will need treating as soon as possible with a solvent based preservative such as Cuprinol shed protector or Ronseal shed preserver. It is recommended that this is then done on an annual basis in order to protect the building from water ingress.
Imperial Size
Select Size
Cladding Material
–
Framework
–
Floor Material
–
Roof Felt
–
Roof Material
–
Roof Type
–
Door Style
–
Hardware
–
Width
Select Size
Ridge Height
Select Size
Depth
Select Size
Door Width
Select Size
Eaves Height
Select Size
Door Height
Select Size
Imperial Size
3ft x 2ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Single
Hardware
Galvanised
Width
3ft (0.91m)
Ridge Height
5ft 7in (1.7m)
Depth
2ft (0.61m)
Door Width
2ft 6in (0.76m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Imperial Size
4ft x 2ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Single
Hardware
Galvanised
Width
4ft (1.2m)
Ridge Height
5ft 7in (1.7m)
Depth
2ft (0.61m)
Door Width
2ft 6in (0.76m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Imperial Size
5ft x 2ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Double
Hardware
Galvanised
Width
5ft (1.5m)
Ridge Height
5ft 7in (1.7m)
Depth
2ft (0.61m)
Door Width
3ft 6in (1.07m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Imperial Size
5ft x 3ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Double
Hardware
Galvanised
Width
5ft (1.5m)
Ridge Height
5ft 7in (1.7m)
Depth
3ft (0.92m)
Door Width
3ft 6in (1.07m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Imperial Size
6ft x 2ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Double
Hardware
Galvanised
Width
6ft (1.8m)
Ridge Height
5ft 7in (1.7m)
Depth
2ft (0.61m)
Door Width
4ft (1.2m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Imperial Size
6ft x 3ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Double
Hardware
Galvanised
Width
6ft (1.8m)
Ridge Height
5ft 7in (1.7m)
Depth
3ft (0.92m)
Door Width
4ft (1.2m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Imperial Size
6ft x 4ft
Cladding Material
12mm x 120mm (approx ½ inch x 4 ¾ inch) Tongue and Groove P.A.R
Framework
28mm x 45mm (approx 1 ⅛ inch x 1 ¾ inch) P.A.R
Floor Material
16mm x 120mm (approx ⅝ inch x 4 ¾ inch) Tongue and Groove P.A.R
Roof Felt
40kg Green Mineral Roofing Felt
Roof Material
12mm 120mm (½ inch x 4 ¾ inch) Tongue and Groove Boards. P.A.R
Roof Type
Pent
Door Style
Double
Hardware
Galvanised
Width
6ft (1.8m)
Ridge Height
5ft 7in (1.7m)
Depth
4ft (1.2m)
Door Width
4ft (1.2m)
Eaves Height
5ft 2in (1.57m)
Door Height
4ft 9in (1.45m)
Please Note: Sizes are approximate only. For specific details consult our technical department. Window and door personalisation options dependant on size and style of shed, please contact us for advice.
